Yes, and be careful of CSCsq77464 if you have saved your config since
the exception...
Tnx
Chris
On 5/3/2014 8:41 AM, Gert Doering wrote:
Hi,
On Sat, May 03, 2014 at 02:23:13PM +0700, vannara vuth wrote:
I'm also facing the similar issue. What was symtom on your router when
receiving the log message? Packet loss to v4 address on loop back as well?
If you run into MLS CEF exception mode, some of your v4 traffic will
be software switched, *and* subject to MLS rate limiters - so you'll
see heavy packet loss on transit traffic to *some* destinations.
Unfortunately the only way to clear the exception is to reboot.
gert
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--
Chris Griffin cgrif...@ufl.edu
Sr. Network Engineer - CCNP Phone: (352) 273-1051
CNS - Network Services Fax: (352) 392-9440
University of Florida/FLR Gainesville, FL 32611
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/