That is correct, netflow happens in the ESP (PFE, as you say), as part of the feature invocation. The mgmt port is not connected to the ESP, it's direct to the RP CPU (RE).
-- Hagen On Thu, May 29, 2014 at 6:37 PM, Daniel Roesen <d...@cluenet.de> wrote: > On Fri, May 30, 2014 at 01:41:16AM +0200, Sander Steffann wrote: > > For netflow you are indeed out of luck as that is (intentionally?) not > > supported on Gi0. > > It's been many years since I looked into that but I remember the reason > was that Netflow export happens from the PFE, which can export only via > "revenue" ports connected to the PFE, not through the RE. > > Best regards, > Daniel > > -- > CLUE-RIPE -- Jabber: d...@cluenet.de -- dr@IRCnet -- PGP: 0xA85C8AA0 > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- Hagen Amen : Multco Network : 503-988-5227 _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/