you are the man , thanks BR,
> From: [email protected] > To: [email protected]; [email protected] > Date: Tue, 3 Jun 2014 09:17:33 +0000 > Subject: Re: [c-nsp] ISIS IOS and IOS XR > > > > -----Original Message----- > From: M K <[email protected]> > Date: Tuesday, 3 June 2014 11:03 > To: "[email protected]" <[email protected]> > Subject: [c-nsp] ISIS IOS and IOS XR > > >Hi all > >I am having issue establishing ISIS between IOS and IOS XR > >IOS > >R1#sh run int lo0 | inc ipv6 > > ipv6 address 2001::1/128 > > ipv6 router isis 1 > >R1#sh run int fas1/0 | inc ipv6 > > ipv6 address 2001:192:102::1/64 > > ipv6 router isis 1 > > > >router isis 1 > > net 49.0001.0000.0000.0001.00 > > is-type level-2-only > > metric-style wide > > > >IOS XR > >RP/0/0/CPU0:XR1#sh run router isis > >Tue Jun 3 12:00:23.223 UTC > >router isis 1 > > is-type level-2-only > > net 49.0001.0000.0000.0010.00 > > interface Loopback0 > > address-family ipv4 unicast > > > > address-family ipv6 unicast > > > > interface GigabitEthernet0/0/0/0 > > address-family ipv4 unicast > > > > address-family ipv6 unicast > > > >I tried without the metric-style wide on the IOS and the same , as well , > >I have configured on the IOS address-family ipv6 unicast under the router > >isis 1 process and the same , what am missing? > > Please enable > > router isis 1 > metric-style wide > address-family ipv6 unicast > multi-topology > > IOS-XR defaults to multi-topoloy when multiple AFs are used, but you need > to enable it in IOS.. > > oli > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
