Although Cisco puts this switch in the data center product line, the Catalyst 4948E is nice for campus edge QoS/QinQ needs. It is 1RU, has 48 1000BASE-T ports and four 10GE SFP+, dual PS, and has silicon-parity with the Sup6 Catalyst 4500 line so has all the same QoS capabilities.
-----Original Message----- From: cisco-nsp [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Lee Starnes Sent: Tuesday, June 17, 2014 11:02 AM To: cisco-nsp@puck.nether.net Subject: [c-nsp] Cisco model recommendation Hello everyone, I am in the need of a recommendation for a Cisco switch that is Layer 2/3, 1U, AC powered and has the same rate limit capability as the ME3400 series has and has 48 ports of 10/100/1000. Does anyone have any experience with a model that would best fit this need? These would not be deployed in remote sites as CPE devices like the ME switches. I just need the ability to do rate limiting and policing of traffic in several office departments. I was looking at the 3650 series, but not sure if this has the same ability to rate limit as the ME switches have. Any advice or input would be greatly appreciated. Best. -Lee _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
