On 28/06/14 23:01, Ivan wrote:
Sorry to respond to my own post but I have some further thoughts that may be useful. The traffic ends up being broadcast at layer 2 (dest MAC address ff:ff:ff:ff:ff:ff) but the IPv4 payload is generally unicast. So I am thinking perhaps the 4900M could be "getting upset" with these packets. Not really expecting the 4900M to look higher than layer 2 of these packets though as vlan does not have SVI.
I'm running a few 4900Ms with the same version, with a mix of clients, and I'm not seeing the same counters incrementing, at least.
What does 'show int counters detail|errors' give you for that port? Anything incrementing?
At this point, it might be helpful to share some sanitised configuration. Tom _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/