Hello, The command 'ipv6 tacacs source-interface Loopback0' for select IPv6 address source for Tacacs have no effect on Cisco 6500 12.2(33)SXJ7.
Is it a know issue ? The command is accepted by the CLI but the packets are sourced with the IPv6 address of outgoing interface and not the loopback. Thanks -- Nicolas DEFFAYET _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
