Hello, Was wondering if anyone on this list is using a Cisco 2811 as an ITP (for SS7 STP functions) and if so is this module "required" to do T1 TDM:
VWIC-2T1/E1-RAN The following documentation states that is required however the more I read up on the VWIC-2T1/E1-RAN has additional features that I do not think I require (such as RAN transport over IP, or 2G/3G): http://www.cisco.com/c/en/us/products/collateral/wireless/ip-transfer-point/product_data_sheet09186a00800925b1.html I am looking to potentially use a 2811 as an ITP and it has a TDM side that will face a LEC for SS7 signalling. Trying to determine if the VWIC-2T1/E1-RAN is the only module that would work in this application, or can I use one of the older (and less expensive) T1 controller WICS (such as VWIC2-2MFT-T1/E1)? Would rather buy a few of a cheaper linecard/module than only have 1 or 2 of the more expensive one. On another note - I would personally rather use a 7206VXR with NPE-G1 to do this however Cisco does not have any IOS images for the NPE-G1 anymore (even though it is a quite capable RP if used in the proper environment). Can not locate an ITP/SS7 image for the NPE-G1, let alone any for that RP :( Any input would be greatly appreciated. Thanks, Rich _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/