Hi, We are trying to parent one CSC-CE to two CSC-PE. The ISP is having MPLS and RR and we are not able to succeed. Is this technically possible. Regards Sath
On Fri, Sep 12, 2014 at 4:17 PM, <[email protected]> wrote: > Send cisco-nsp mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > https://puck.nether.net/mailman/listinfo/cisco-nsp > or, via email, send a message with subject or body 'help' to > [email protected] > > You can reach the person managing the list at > [email protected] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of cisco-nsp digest..." > > > Today's Topics: > > 1. Re: Silly question regarding C3K-NM-10G (Mike Hale) > 2. Cisco SF302-08 switches (Murat Kaipov) > 3. Re: Silly question regarding C3K-NM-10G (Scott Harvanek) > 4. Re: Silly question regarding C3K-NM-10G (?ukasz Bromirski) > 5. Re: Silly question regarding C3K-NM-10G (Peter Rathlev) > 6. Re: Silly question regarding C3K-NM-10G (Peter Rathlev) > 7. Re: partition-table and file-system type on Cisco 4500 SUP > compact-flash (Martin T) > 8. Issue with MPLS implementation using cisco ME-3750-24TE-M > within our backbone (thucydide tajouo) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 11 Sep 2014 08:16:54 -0700 > From: Mike Hale <[email protected]> > To: Scott Granados <[email protected]> > Cc: "[email protected]" <[email protected]> > Subject: Re: [c-nsp] Silly question regarding C3K-NM-10G > Message-ID: > < > can3um4zashh_pewiz33v+bf+qh0hu7j388x0qdop6k56dac...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > You should just be able to pull it out...I don't think there's a tab > since it's held in place with the two screws. I don't remember any > tabs on the ones I've removed. > > On Thu, Sep 11, 2014 at 7:54 AM, Scott Granados <[email protected]> > wrote: > > Carefully as apposed to what, recklessly press the tab with a hammer? > > > > ;) > > > > On Sep 11, 2014, at 10:12 AM, Drew Weaver <[email protected]> > wrote: > > > >> In the instructions for removing a network module from a 3560x it > states 'carefully press the tab on the right side of the module'. > >> > >> I can't seem to locate a tab on the NM-10G which releases it from the > slot. > >> > >> Is it under the mounting bracket? Under the faceplate? Is anyone aware > of where this mythical tab resides? > >> _______________________________________________ > >> cisco-nsp mailing list [email protected] > >> https://puck.nether.net/mailman/listinfo/cisco-nsp > >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > -- > 09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0 > > > ------------------------------ > > Message: 2 > Date: Thu, 11 Sep 2014 21:36:05 +0400 > From: "Murat Kaipov" <[email protected]> > To: <[email protected]> > Subject: [c-nsp] Cisco SF302-08 switches > Message-ID: <[email protected]> > Content-Type: text/plain; charset="us-ascii" > > Hello Guys. > > Did you have any experience with Cisco Small Business SF300 switches? We > purchased few of them and now I have little trouble. I can't add this > switches to snmp monitoring. For monitoring purposes I use PRTG v13, I try > add snmp mib's published by Cisco on official web site, but they doesn't > work. May one of you know how to add this switches to PRTG or any other > snmp > tool. I try to use Paessler MIB Importer v3 but, and I have "::=" expected > error on line 31. I add screenshot to attachment. Can you advise something? > > Than you. > > > > > > ------------------------------ > > Message: 3 > Date: Thu, 11 Sep 2014 16:37:39 -0400 > From: Scott Harvanek <[email protected]> > To: Mike Hale <[email protected]>, Scott Granados > <[email protected]> > Cc: "[email protected]" <[email protected]> > Subject: Re: [c-nsp] Silly question regarding C3K-NM-10G > Message-ID: <[email protected]> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Same here, I do not recall any tabs. > > Scott H. > > On 9/11/14, 11:16 AM, Mike Hale wrote: > > You should just be able to pull it out...I don't think there's a tab > > since it's held in place with the two screws. I don't remember any > > tabs on the ones I've removed. > > > > On Thu, Sep 11, 2014 at 7:54 AM, Scott Granados <[email protected]> > wrote: > >> Carefully as apposed to what, recklessly press the tab with a hammer? > >> > >> ;) > >> > >> On Sep 11, 2014, at 10:12 AM, Drew Weaver <[email protected]> > wrote: > >> > >>> In the instructions for removing a network module from a 3560x it > states 'carefully press the tab on the right side of the module'. > >>> > >>> I can't seem to locate a tab on the NM-10G which releases it from the > slot. > >>> > >>> Is it under the mounting bracket? Under the faceplate? Is anyone aware > of where this mythical tab resides? > >>> _______________________________________________ > >>> cisco-nsp mailing list [email protected] > >>> https://puck.nether.net/mailman/listinfo/cisco-nsp > >>> archive at http://puck.nether.net/pipermail/cisco-nsp/ > >> > >> _______________________________________________ > >> cisco-nsp mailing list [email protected] > >> https://puck.nether.net/mailman/listinfo/cisco-nsp > >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > > > > > ------------------------------ > > Message: 4 > Date: Thu, 11 Sep 2014 22:57:29 +0200 > From: ?ukasz Bromirski <[email protected]> > To: Drew Weaver <[email protected]> > Cc: "[email protected]" <[email protected]> > Subject: Re: [c-nsp] Silly question regarding C3K-NM-10G > Message-ID: <[email protected]> > Content-Type: text/plain; charset=utf-8 > > > > On 11 Sep 2014, at 16:12, Drew Weaver <[email protected]> wrote: > > > > In the instructions for removing a network module from a 3560x it states > 'carefully press the tab on the right side of the module'. > > > > I can't seem to locate a tab on the NM-10G which releases it from the > slot. > > > > Is it under the mounting bracket? Under the faceplate? Is anyone aware > of where this mythical tab resides? > > That?s an error in the doc, it should be corrected. There?s no > tab. You just unscrew the module and pull it. > > -- > "There's no sense in being precise when | ?ukasz Bromirski > you don't know what you're talking | jid:[email protected] > about." John von Neumann | http://lukasz.bromirski.net > > > > > ------------------------------ > > Message: 5 > Date: Thu, 11 Sep 2014 23:15:38 +0200 > From: Peter Rathlev <[email protected]> > To: Drew Weaver <[email protected]> > Cc: "[email protected]" <[email protected]> > Subject: Re: [c-nsp] Silly question regarding C3K-NM-10G > Message-ID: <[email protected]> > Content-Type: text/plain; charset="UTF-8" > > On Thu, 2014-09-11 at 14:12 +0000, Drew Weaver wrote: > > I can't seem to locate a tab on the NM-10G which releases it from the > > slot. > > Just repeating what others say: There's no tab to be pressed. It must be > an error in the documentation. > > We just loosen the screws and pull the module in the screws. > > -- > Peter > > > > > ------------------------------ > > Message: 6 > Date: Thu, 11 Sep 2014 23:19:14 +0200 > From: Peter Rathlev <[email protected]> > To: ?ukasz Bromirski <[email protected]> > Cc: "[email protected]" <[email protected]> > Subject: Re: [c-nsp] Silly question regarding C3K-NM-10G > Message-ID: <[email protected]> > Content-Type: text/plain; charset="UTF-8" > > On Thu, 2014-09-11 at 22:57 +0200, ?ukasz Bromirski wrote: > > That?s an error in the doc, it should be corrected. There?s no > > tab. You just unscrew the module and pull it. > > Heh, it's a detail a senior tech can use to reveal wether a junior tech > actually read the documentation. :-) > > -- > Peter > > > > > ------------------------------ > > Message: 7 > Date: Fri, 12 Sep 2014 02:12:31 +0300 > From: Martin T <[email protected]> > To: "[email protected]" <[email protected]> > Subject: Re: [c-nsp] partition-table and file-system type on Cisco > 4500 SUP compact-flash > Message-ID: > <CAJx5YvHbQVLNtE2Vmf=OcY0J= > [email protected]> > Content-Type: text/plain; charset=UTF-8 > > Another utility, which should support both reading and writing to > "Class A" file-systems, at least to some extent, is cffs: > > root@T60:~# cffs -v > cffs version 0.06 (C) Simon Evans 2002 ([email protected]) > root@T60:~# > > However, it seems to refuse to support ATA-type flash-memory cards: > > root@T60:~# fdisk -lu /dev/sdb > > Disk /dev/sdb: 32 MB, 32112640 bytes > 255 heads, 63 sectors/track, 3 cylinders, total 62720 sectors > Units = sectors of 1 * 512 = 512 bytes > Sector size (logical/physical): 512 bytes / 512 bytes > I/O size (minimum/optimal): 512 bytes / 512 bytes > Disk identifier: 0x00000000 > > Disk /dev/sdb doesn't contain a valid partition table > root@T60:~# cffs /dev/sdb --dir > /dev/sdb is not an MTD character device > root@T60:~# > > > ..and detects only linear-flash cards. For example SMART 4MB linear > flash PCMCIA card: > > root@T60:~# dmesg | tail -5 > [ 2756.208470] pcmciamtd 0.0: pcmcia: could not parse base and rmask0 of > CIS > [ 2756.212768] Found: Intel 28F016S5 > [ 2756.212773] SMART Modular Technologies 4MB FLASH Card : > Found 2 x8 devices at 0x0 in 16-bit bank > [ 2756.215555] erase region 0: offset=0x0,size=0x20000,blocks=32 > [ 2756.218484] pcmciamtd 0.0: mtd0: SMART Modular Technologies 4MB > FLASH Card > root@T60:~# cffs /dev/mtd0 --dir > root@T60:~# cffs /dev/mtd0 --fsck > Free space = 4194304 bytes > > Flash is not blank > root@T60:~# cffs /dev/mtd0 --erase > Size = 4194304 erase size = 131072 > 32 Erase blocks > Proceed with erase [Y/n]Y > Erasing block 1/32 > erase failed: Timer expired > > > However, this erase operation never completes. Ciscoflash, on the > other hand, seems not to support linear flash: > > root@T60:~# ciscoflash -v -d /dev/mtd0 info > ciscoflash: Unknown magic number (0x00000000) > root@T60:~# > > > Are there "Class A" and "Class B" file-systems both on ATA-type and > linear-type flash cards? Has anyone succesfully written to "Class A" > file-system under Linux? > > > thanks, > Martin > > > On Mon, Jun 17, 2013 at 5:18 PM, Martin T <[email protected]> wrote: > > One utility, which supports reading the "Class A" file-system, is > > ciscoflash(http://freecode.com/projects/ciscoflash) by Simon Lockhart: > > > > T42 ~ # ciscoflash -d /dev/sdb dir > > -#- --type-- --crc--- -seek-- -length- -----date/time------ name > > 1 00000002 E81CCB85 09831C 426652 Jun 17 2013 03:56:03 > > cat4500-ios-promupgrade-122_31r_SGA7 > > T42 ~ # ciscoflash -d /dev/sdb extract > > T42 ~ # ls -l cat4500-ios-promupgrade-122_31r_SGA7 > > -rw-r--r-- 1 root root 426652 2013-06-17 17:13 > > cat4500-ios-promupgrade-122_31r_SGA7 > > T42 ~ # > > > > However, it does not support writing to "Class A" file-systems. > > > > > > regards, > > Martin > > > > 2013/6/17, Martin T <[email protected]>: > >> Hi, > >> > >> older Cisco 4500 series supervisor engines support compact flash > >> cards. However, Cisco-branded 32MB compact-flash taken from Cisco 1800 > >> series router is not recognized by SUP: > >> > >> Catalyst4500#dir slot0: > >> %Error opening slot0:/ (Bad device info block) > >> Catalyst4500# > >> > >> After executing "format slot0:", the compact flash became accessible: > >> > >> Catalyst4500#format slot0: > >> Format operation may take a while. Continue? [confirm] > >> Format operation will destroy all data in "slot0:". Continue? [confirm] > >> Enter volume ID (up to 64 chars)[default slot0]: > >> > >> Format of slot0 complete > >> Catalyst4500#dir slot0: > >> Directory of slot0:/ > >> > >> No files in directory > >> > >> 31784960 bytes total (31784960 bytes free) > >> Catalyst4500# > >> > >> > >> The problem is, that now I'm not able to access this compact-flash in > >> my PC. Looks like it even does not have a partition-table: > >> > >> T42 ~ # dmesg | tail > >> [1983944.880491] ata5.00: 62720 sectors, multi 0: LBA > >> [1983944.888476] ata5.00: configured for PIO0 > >> [1983944.888794] scsi 4:0:0:0: Direct-Access ATA STI Flash > >> 8.0.0 01/1 PQ: 0 ANSI: 5 > >> [1983944.889398] sd 4:0:0:0: Attached scsi generic sg2 type 0 > >> [1983944.891205] sd 4:0:0:0: [sdb] 62720 512-byte logical blocks: > >> (32.1 MB/30.6 MiB) > >> [1983944.891403] sd 4:0:0:0: [sdb] Write Protect is off > >> [1983944.891414] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > >> [1983944.891501] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: > >> enabled, doesn't support DPO or FUA > >> [1983944.910031] sdb: unknown partition table > >> [1983944.910632] sd 4:0:0:0: [sdb] Attached SCSI removable disk > >> T42 ~ # fdisk -lu /dev/sdb > >> > >> Disk /dev/sdb: 32 MB, 32112640 bytes > >> 255 heads, 63 sectors/track, 3 cylinders, total 62720 sectors > >> Units = sectors of 1 * 512 = 512 bytes > >> Sector size (logical/physical): 512 bytes / 512 bytes > >> I/O size (minimum/optimal): 512 bytes / 512 bytes > >> Disk identifier: 0x00000000 > >> > >> Disk /dev/sdb doesn't contain a valid partition table > >> T42 ~ # file -s /dev/sdb > >> /dev/sdb: data > >> T42 ~ # dd if=/dev/sdb bs=512 count=1 | hexdump -C > >> 00000000 88 06 35 76 ea 01 00 00 01 00 00 00 00 00 04 00 > >> |..5v............| > >> 00000010 ff ff ff ff 01 00 06 00 03 00 00 00 e5 01 00 00 > >> |................| > >> 00000020 00 00 00 01 02 00 7c 60 00 00 00 00 02 00 c2 ff > >> |......|`........| > >> 00000030 00 00 3e 00 e8 01 00 00 01 00 00 00 e9 01 00 00 > >> |..>.............| > >> 00000040 01 00 00 00 6c 73 74 6f 00 30 00 00 00 00 00 00 > >> |....lsto.0......| > >> 00000050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> |................| > >> * > >> 000000a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 > >> |................| > >> 000000b0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > >> |................| > >> * > >> 00000100 d0 ba 1e 0b 02 00 f8 5f b8 80 ff ff ff ff ff ff > >> |......._........| > >> 00000110 6f 79 61 64 66 2d 6c 73 62 69 6d 2d 00 00 00 00 > >> |oyadf-lsbim-....| > >> 00000120 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> |................| > >> * > >> 00000140 45 7f 46 4c 02 01 00 01 00 00 00 00 00 00 00 00 > >> |E.FL............| > >> 00000150 02 00 70 00 00 00 01 00 00 01 00 00 00 00 34 00 > >> |..p...........4.| > >> 00000160 02 00 68 5e 00 00 00 00 34 00 20 00 01 00 28 00 |..h^....4. > >> ...(.| > >> 00000170 0a 00 09 00 00 00 01 00 01 00 00 00 00 01 00 00 > >> |................| > >> 00000180 00 01 00 00 01 00 b4 57 29 00 a4 c2 00 00 07 00 > >> |.......W).......| > >> 00000190 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> |................| > >> 000001a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> |................| > >> * > >> 1+0 records in > >> 1+0 records out > >> 512 bytes (512 B) copied, 0.0158727 s, 32.3 kB/s > >> 00000200 > >> T42 ~ # > >> > >> > >> "format" command creates a "Class A" file-system? Is this "Class A" > >> file-system some kind of Cisco-proprietary file-system? is there a way > >> to access this file-system under modern(2.6/3.x) Linux kernel? > >> > >> > >> regards, > >> Martin > >> > > > ------------------------------ > > Message: 8 > Date: Fri, 12 Sep 2014 11:48:42 +0100 > From: thucydide tajouo <[email protected]> > To: "[email protected]" <[email protected]> > Subject: [c-nsp] Issue with MPLS implementation using cisco > ME-3750-24TE-M within our backbone > Message-ID: > <[email protected]> > Content-Type: text/plain; charset=iso-8859-1 > > > > Hi everybody, > > I am planning to intergrate MPLS in our backbone using > cisco ME-3750-24TE-M. > For it, i have implemented a small lab with : > > ? 3 cisco ME-3750-24TE-M (2 provider edge and 1 > LSR) > ? 1 WS-3550-24SMI (customer edge) > ? 1 cisco 1720 (customer edge) > > To allow communication between routers (PE and CE), we are > using OSPF as routing protocol between LSR and PE, and default routes on > Customer edge with PE as next hop. > All these configurations are working very well so from one > CE (cisco 1720), we can ping another CE (WS-3550) without any problem. > > Note that between PE and LSR, we use VLANs interface > (because MPLS cannot be enable on physical interfaces). > > Once MPLS is enabled between PE and LSR, we note that : > > ? From PE, we can ping any other router on the > network > ? From any CE, we can ping PE and LSR interfaces > which are within MPLS backbone > ? From one CE we cannot ping another CE > ? From one CE we cannot ping PE interface > connected to another CE > > I also note that, when implementing the same architecture > (with 7500 routers) using GNS3 simulator, we can ping any CE from another > CE > with MPLS enable. > > So i wanted to know if there are particulars details to > consider when implementing MPLS with ME-3750-24TE-M. > How am i supposed to do. > > Need your help, please > > > Best regards, > > > > > Thucydide TAJOUO > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > cisco-nsp mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > > ------------------------------ > > End of cisco-nsp Digest, Vol 142, Issue 19 > ****************************************** > -- With Regards, Sathiyan D SDE, MPLSNOC, STR, 9483539441. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
