I said : "Note that between PE and LSR, we use VLANs interface (because MPLS cannot be enable on physical interfaces)." because of what you can see on the image in attach according to this
http://www.cisco.com/c/en/us/td/docs/switches/metro/catalyst3750m/software/release/12-2_55_se/configuration/guide/3750metro_scg/swmpls.html#wp1182634 until now, i realize that when MPLS is disabled on MPLS cloud interfaces, i can ping from one customer from another but when i enable it again, ping cannot pass. Bests regards Thucydide TAJOUO Le Vendredi 12 septembre 2014 12h09, Mikael Abrahamsson <[email protected]> a écrit : On Fri, 12 Sep 2014, thucydide tajouo wrote: > Note that between PE and LSR, we use VLANs interface (because MPLS > cannot be enable on physical interfaces). What do you mean here? You can only do MPLS on the rightmost two SFP interfaces on the ME3750. > So i wanted to know if there are particulars details to consider when > implementing MPLS with ME-3750-24TE-M. How am i supposed to do. Apart from that they have very little RAM and forwarding table, everything is fine :P They're very restricted, make sure you test them properly for your scaling needs. -- Mikael Abrahamsson email: [email protected] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
