Hi, on a VPN connection we are running we are intermittently experiencing some problems. Local system is a Cisco ASA cluster (Active/Passive HA), OS is 8.3(2)37, remote end is a Bintec device, sorry, no more details on the exact model.
The VPN comes up fine as such and works for a while. Occasionally, the VPN tunnel stops working, though we do not have further information on what the root cause of the problem could be. Anyway, in that situation, while the tunnel looks like it's up on the Bintec side, no traffic is transmitted anymore. By re-initiating the VPN on the Bintec, the tunnel is setup again and will work. We have already set up a backup tunnel, which has mitigated the problem somewhat, but on occasion both tunnels will fail and need to be set up again. Another problem is that usually we are not informed of the failure, so debug information is rather scarce. I can not say what state the local side of the tunnels is in in that situation. Due to the fact that the connection is required for card payment information, re-establishing a working connection is urgent, so keeping it down for debugging purposes is more or less out of the question. Has anybody here seen this problem in a similar situation and could point me towards a solution? Thanks, Garry _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/