On 09/12/2014 20:39, Murat Kaipov wrote:
Hello Marco.
Keep in mind that ME3600/ME3800 platforms doesn't support BFD offload, and
all BFD packets processed by CPU.
http://www.cisco.com/c/en/us/td/docs/switches/metro/me3600x_3800x/software/r
elease/15-4_1_S/chassis/configuration/guide/3600x_24cxscg/swbfd.pdf
Show configuration on both sides please.
Hello Murat,
I'm well aware of the hardware offload limit.
But cisco brought it to ME-3600X-24CX and I *HOPE* they will do the same
with the other platforms in future.
Anyway you can find the configuration below
**** C6500_1 ****
!
router ospf 1
router-id 192.0.2.52
auto-cost reference-bandwidth 10000
redistribute connected subnets
bfd all-interfaces
mpls ldp sync
!
interface GigabitEthernet2/7
mtu 9216
ip address 192.0.2.174 255.255.255.252
ip ospf authentication message-digest
ip ospf message-digest-key 1 md5 7 *HIDDEN*
ip ospf network point-to-point
ip ospf 1 area 0
udld port disable
mls qos trust dscp
mpls ip
bfd interval 300 min_rx 300 multiplier 3
!
**** ME3600X ****
!
platform bfd allow-svi
!
bfd-template single-hop bfd-core
interval min-tx 300 min-rx 300 multiplier 3
!
router ospf 1
router-id 192.0.2.19
auto-cost reference-bandwidth 10000
redistribute connected subnets
redistribute static subnets
bfd all-interfaces
mpls ldp sync
mpls ldp autoconfig area 0
!
interface GigabitEthernet0/24
no switchport
mtu 9216
ip address 192.0.2.173 255.255.255.252
ip ospf authentication message-digest
ip ospf message-digest-key 1 md5 7 *HIDDEN*
ip ospf network point-to-point
ip ospf 1 area 0
udld port disable
bfd template bfd-core
!
Thank you
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
