Hi all I was trying to test the MTR on OSPF topology , I made the configurations (the commands are in place) , but when configuring the policy-map type class-routing ipv4 unicast TOPOLOGY_POLICY command i got the error % can't provision policies of type 2 , I guess it's not supported on 7200 but I was wondering why the command is there while it's not supported
BR, Mohammad > Subject: Re: [c-nsp] ospf mtr > From: luk...@bromirski.net > Date: Fri, 12 Dec 2014 22:21:57 +0100 > CC: cisco-nsp@puck.nether.net > To: eng_m...@hotmail.com > > > > On 12 Dec 2014, at 21:56, Mohammad Khalil <eng_m...@hotmail.com> wrote: > > > > Hi all i am trying to configure osp mtr (multi-topology routing) > > When configuring the policy-map i get the error cant provision policies of > > type 2 any ideas > > What's the exact thing you're trying to achieve and what's > the exact error message you're getting? > > For QoS with MTR enabled take a look here: > http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mtr/configuration/15-s/mtr-15-s-book/qos-mqc-support-mtr.html > > -- > "There's no sense in being precise when | Łukasz Bromirski > you don't know what you're talking | jid:lbromir...@jabber.org > about." John von Neumann | http://lukasz.bromirski.net > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/