Maybe traffic from and to the router cannot be processed for Netflow export? Only traffic through the router.
On Wed, Jan 7, 2015 at 7:50 AM, CiscoNSP List <[email protected]> wrote: > Hi Everyone, > > I have 2 x ASR1K's connected together, with the following: > > flow record rm_1 > match routing vrf input > match ipv4 source address > match ipv4 destination address > match transport source-port > match transport destination-port > collect interface input > collect interface output > collect counter bytes > collect counter packets > ! > ! > flow monitor mm_1 > record rm_1 > > If I create a test vrf and apply it to a loop interface on both routers, > and enable netflow on them > > ip flow monitor mm_1 input > > Then ping between the loops (Using src IP of the loops), I see no flows if > I issue: > > show flow monitor mm_1 cache format table > > From what Ive read (Ive only just tried testing this), I should be able to > "see" VRF flows, if netflow is enabled on an Interface in a vrf? > > Any help/suggestions greatly appreciated. > > Cheers. > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
