On Saturday, January 24, 2015 04:17:34 PM Victor Sudakov wrote: > How do I configure the switches to pass frames with > MTU=1600, if possible, without disrupting the service?
On the 3560 and 3750, it is a global command, and not per interface:
conf t
system mtu jumbo
You will need to reload the box, however.
I'd go for the full 9,000 bytes. You never know what will happen in the
future, especially if get access to dark fibre and/or use a carrier that
support very large MTU in their core.
Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
