Thanks for the repliesI am establishing eBGP session with this provider , but because the distance is far , it will provide me through a hop (SDH) then will reach his router
Date: Sun, 15 Feb 2015 21:30:04 +0300 Subject: Re: [c-nsp] L2 Switchover From: [email protected] To: [email protected] CC: [email protected] In addition, can you explain what kind of L2 device you use in SDH? 15 Фев 2015 г. 21:07 пользователь "Мурат Каипов" <[email protected]> написал: Hello dear. Do you use some routing protocol? So, if you do, you have two choices. First, do nothing, and hello and dead timers does failover for you. Second, use BFD, and you will have subsecond failover. Best Regards. 15 Фев 2015 г. 18:03 пользователь "M K" <[email protected]> написал: HiI have ASR9k , I got a new connection from a provider through SDH (active , backup)How can I trace if I lost connectivity as there is L2 device in between and move the traffic over the backup link _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
