Yes based on realm but based on radius attributs , not a physical config on the router.
The tunnel destination is sent by the radius of my customer Le vendredi 20 mars 2015, CiscoNSP List <[email protected]> a écrit : > > You want to do VPDN Multihop based on a specific domain? (i.e. forward > connection requests for a specific realm to an alternate LNS (So create an > L2TP tunnel)) > > > If so, I set one of these up a couple of years ago....ill dig up the > working conf if that's what you are trying to do. > > > > > > > Date: Fri, 20 Mar 2015 04:29:43 +0100 > > From: [email protected] > <javascript:_e(%7B%7D,'cvml','[email protected]');> > > To: [email protected] > <javascript:_e(%7B%7D,'cvml','[email protected]');> > > Subject: Re: [c-nsp] Vpdn config ? > > > > i have one vpdn-group only: > > > > > > vpdn-group UserLNS > > accept-dialin > > protocol l2tp > > virtual-template 1 > > terminate-from hostname LAC-172-20-1-1 > > local name LNS-172-20-1-1 > > lcp renegotiation always > > no l2tp tunnel authentication > > l2tp tunnel receive-window 500 > > l2tp tunnel retransmit retries 7 > > l2tp tunnel retransmit timeout min 2 > > l2tp tunnel retransmit timeout max 7 > > > > > > interface Virtual-Template1 > > description DSL User > > mtu 1460 > > ip unnumbered Loopback100 > > ip tcp adjust-mss 1420 > > no logging event link-status > > no peer default ip address > > keepalive 20 > > ppp mtu adaptive > > ppp authentication chap ppp-radius > > ppp multilink > > > > > > It's linked with the loopback100 but i put: > > Tunnel-Client-Endpoint:0 = "172.20.1.1" > > > > "172.20.1.1" is not the IP of Loopback100, it's a problems ? > > > > > > > > because the first tunnel (my supplier to my router) work, this > > vpdn/virtual-template > > is good i think's > > > > but for the second tunnel, my router to my customer, it should not be a > > second > > vpdn/virtual-template in "out" ? > > > > > > thanks for your help > > > > > > > > > > > > 2015-03-19 10:37 GMT+01:00 Olivier CALVANO <[email protected] > <javascript:_e(%7B%7D,'cvml','[email protected]');>>: > > > > > Hi > > > > > > i am search a vpdn config sample for my cisco 7301. I want forward a > ppp > > > connexion > > > to another router. > > > > > > My radius sent to my router a Tunnel-End-Point but he don't forward (i > see > > > the connection > > > in sh users) > > > > > > thanks for your help > > > olivier > > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > <javascript:_e(%7B%7D,'cvml','[email protected]');> > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
