On 20/Apr/15 04:33, CiscoNSP List wrote: > Hi Everyone, > > Have 2 new ME3600's (ME3600-01(Working fine) + ME3600-02(fails to reach any > VRF IP on 1 PE..all other PE's(~10 other PE's) reachability is fine), both > RR-clients, both have no problems reaching all our other PE's IP's in global > and VRF's) > > If I run a "show ip route vrf CUSTA" on both ME's, all routes displayed are > identical...including the problematic PE. > > ME3600-01 can happily reach all VRF IP's on this PE, as well as Global > > MR3600-02 can happily reach all global IP's on this PE, but no VRF IP's...all > VRF IP's are displayed (sh ip route vrf foo), just cant ping them, and traces > to them fail...stars on first hop...same in reverse(i.e. from problem > PE...traces back to ME01, work fine, traces to ME02, I get stars on first hop) > > > Traces to/from problem PE + both ME's Loops(Used for IGP+BGP) take same path, > and work. > > > Any suggestions are greatly appreciated!
Try clearing the FIB and/or reloading the box and let me know what happens. We've run into a number of FIB-related on our ME3600X's (but affecting only the global table, and only IPv4). So it would be interesting to see if you are seeing something similar. Mark. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
