Have you tried something like this Daniel? route-map OSPF-REDIST permit 10 match ip address prefix-list PERMIT-OSPF match interface Gig 2/5 route-map OSPF-REDIST deny 20 match interface Gig 2/5 route-map OSPF-REDIST permit 30
Pat Wed, Apr 22, 2015 at 01:24:14AM -0400, Daniel Corbe wrote: > > I've run into an interesting problem. > > I'd like to selectively redistribute routes on one particular interface. > > Is there a way to apply redistribute route-maps on a per interface > basis? > > Alternatively, can someone recommend a way to write a global > redistribute route-map in such a way that it only matches and permits a > certain subset of IPs on a particular interface and allows full > reditribution on every other interface? > > Kind of like a logical NOT for a routemap? > > Something like this? > > route-map OSPF-REDIST permit 5 > match ip address prefix-list PERMIT-OSPF > match interface GigabitEthernet 2/5 > ! But it actually needs to stop here and not process #10 on GigE2/5 > route-map OSPF-REDIST permit 10 > match interface anything but GigE2/5 > ! > > not really sure. > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- Patrick Cole <z...@wwwires.com> Senior Network Specialist World Without Wires PO Box 869. Palm Beach, QLD, 4221 Ph: 0410 626 630 _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/