Apparently supported in IOS-XR, but not IOS/IOS-XE. Too bad, looks genuinely useful.
On Sun, Jun 7, 2015 at 9:36 AM, Mohammad Khalil <eng_m...@hotmail.com> wrote: > I am not sure about the functionality , but the option under the vpnv4 > address-family exists > RP/0/0/CPU0:XR1(config)#router bgp 1 > > RP/0/0/CPU0:XR1(config-bgp)#neighbor 2.2.2.2 > > RP/0/0/CPU0:XR1(config-bgp-nbr)#address-family vpnv4 unicast > > RP/0/0/CPU0:XR1(config-bgp-nbr-af)#? > > aigp Enable AIGP for this neighbor > > BR, > Mohammad > > > Date: Fri, 5 Jun 2015 14:40:00 -0400 > > From: tdur...@gmail.com > > To: cisco-nsp@puck.nether.net > > Subject: [c-nsp] Cisco BGP AIGP > > > > > BGP AIGP has been added to some versions of IOS/IOS-XE/IOS-XR. Looks like > > this feature is restricted to IPv4 and IPv6 AF though. Anyone know if > AIGP > > for VPNv4 and VPNv6 is supported or on the roadmap? > > > > -- > > Tim:> > > _______________________________________________ > > cisco-nsp mailing list cisco-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- Tim:> _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/