Hey, Its a pretty common behaviour since all machines read from different places on the EEP rom.
Normally it is Cisco ASR that reports from a different place of EEP. The SFP is a LH/LX optics, but reports as a ZX. Example: NAME: "GigabitEthernet 0/7", DESCR: "1000BASE-ZX SFP" Optical Optical Temperature Voltage Current Tx Power Rx Power Port (Celsius) (Volts) (mA) (dBm) (dBm) --------- ----------- ------- -------- -------- -------- Gi0/7 41.9 3.29 18.9 -6.8 -- -4.4 2015-07-06 10:50 GMT+02:00 CiscoNSP List <cisconsp_l...@hotmail.com>: > > Hi Everyone, > > > > As per title....ordered a bunch of our usual single mode SFP's. and they > are badged as LH, but when inserted into router/switch, they report as > ZX.....can I connect our LH to the new ZX ones (I dont have a router/switch > handy to test), and have to ship them interstate.....but obviously dont > want to if they are no compatible with our existing LH SFP's > > > > Cheers. > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/