As we are in the talk of l2vpns , I have searched on google for configuration for evpn but for Cisco I did not find good documentation regarding it , did anyone tried it before and can share? Thanks BR,Mohammad
From: eng_m...@hotmail.com To: cisco-nsp@puck.nether.net; n...@foobar.org Subject: RE: VPLS BGP Signaling Date: Sun, 26 Jul 2015 16:53:26 +0300 Thanks all , I have figured it out It was the ve id on both routers , configured similar , when I changed it on CSR2 it worked :) BR,Mohammad From: eng_m...@hotmail.com To: cisco-nsp@puck.nether.net; n...@foobar.org Subject: Re: VPLS BGP Signaling Date: Sun, 26 Jul 2015 16:45:05 +0300 Hi Nick/AllSorry for the bad format Is it readable now? BR,Mohammad ----------------- Hi all I have two CSR1000v boxes which am trying to establish several VPLS combinations for connectivity between two switches All combinations worked perfectly except for BGP signaling (all the previous setups depend on LDP as a signaling protocol) CSR1,CSR2 l2vpn vfi context VFIB vpn id 105 autodiscovery bgp signaling bgp ve id 105 ve range 55 route-target export 1:1 route-target import 1:1 bridge-domain 105 member GigabitEthernet2 service-instance 105 member vfi VFIB interface GigabitEthernet2 no ip address negotiation auto service instance 105 ethernet encapsulation dot1q 105 ASR1#sh xconnect all Legend: XC ST=Xconnect State S1=Segment1 State S2=Segment2 State UP=Up DN=Down AD=Admin Down IA=Inactive SB=Standby HS=Hot Standby RV=Recovering NH=No Hardware XC ST Segment 1 S1 Segment 2 S2 ------+---------------------------------+--+---------------------------------+-- -- pri vfi VFIB UP unkn Invalid Segment -- UP pri bd 105 UP vfi VFIB UP ASR1#show bgp l2vpn vpls all BGP table version is 5, local router ID is 1.1.1.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter, x best-external, a additional-path, c RIB-compressed, Origin codes: i - IGP, e - EGP, ? - incomplete RPKI validation codes: V valid, I invalid, N Not found Network Next Hop Metric LocPrf Weight Path Route Distinguisher: 1:105 * i 1:105:VEID-105:Blk-55/136 3.3.3.3 0 100 0 ? *> 0.0.0.0 32768 ? No ping between the two hosts ASR1#sh run | sec router bgp router bgp 1 bgp log-neighbor-changes no bgp default ipv4-unicast neighbor 3.3.3.3 remote-as 1 neighbor 3.3.3.3 update-source Loopback0 ! address-family ipv4 exit-address-family ! address-family l2vpn vpls neighbor 3.3.3.3 activate neighbor 3.3.3.3 send-community both neighbor 3.3.3.3 suppress-signaling-protocol ldp exit-address-family Any ideas? Thanks BR, Mohammad _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/