Hi all
I faced OSPF neighbor ships on my 7600 box , when I checked the log messages , 
I found the below



Aug 15
04:33:28.122 UTC: %C7600_PWR-SP-2-PSFAIL: power supply 1 output failed.

Aug 15
04:33:28.122 UTC: %C7600_PWR-SP-4-PSREDUNDANTONESUPPLY: in power-redundancy 
mode, system is
operating on one power supply.

Aug 15
04:33:28.130 UTC: %C7600_PWR-SP-2-PSFAIL: power supply 2 output failed.

Aug 15
04:33:28.130 UTC: %C7600_POWER-SP-4-GLITCH: Recovered from glitch in system 
power supply.

Aug 15
04:33:30.126 UTC: %C7600_PWR-SP-4-PSOK: power supply 1 turned on.

Aug 15
04:33:30.130 UTC: %C7600_PWR-SP-4-PSOK: power supply 2 turned on.


When I searched for that , most of the comments were related to RSP module , I 
just want to know if anyone here faced this

Thanks

BR,
Mohammad
                                          
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to