I agree - and the very fact that when browsing for routers on cisco's website - by default for branch routers -as of a few weeks ago - only the 4xxx and the 8xx are shown. It's a multitude of clicks to see the ISRg2's.
Check this link - it's the new router performance sheet, I've been using it to size up new client branch routers (well in the last 2 weeks) http://pivotalnetworks.co.uk/wp-content/uploads/2014/10/enterprise-routing-portfolio-poster2014.pdf A regular googleing turns up the ISRG2 version, not this newer one. -----Original Message----- From: cisco-nsp [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Jeremy Bresley Sent: 23 September 2015 14:24 To: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] ASR920 vs ISR4000 On 9/23/2015 2:24 AM, Tony via cisco-nsp wrote: Both of those options are quite probably overkill for what you've described. If a 2811 is currently doing what you need in the deployment and the only change is an increase in speed, just go with the next step up. For what you've described a 2911 would easily fit what you want and I imagine it would be a lot cheaper than either ISR4000 or ARS920. Depends whether you want something new and shiny or something that will just get the job done. If you want to purchase a router now for some future upgrade, then you'd have to take a stab at what you think the upgrade might be and when you think it might happen and then purchase something that you think might be sufficient for that. ---- Actually price-wise the 4331s are very close in cost to a 2921, and for most workloads, significantly higher performance. Looking at Cisco's last several generations of branch routers, the performance of the next-gen model one step down is about the same as the previous generation. So a 2921->4331 for the same price, or a 4321 for the same performance level and less money. Unless you're buying on the used market or have a very specific need for something only available in the ISR G2 platform, I'd be looking at the ISR 4Ks as a replacement. I wouldn't be surprised to hear the ISR G2s get announced for EOL in the next 6-12 months looking at Cisco's previous release cycles for branch routers. Jeremy "TheBrez" Bresley b...@brezworks.com _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/