On 25/09/2015 03:23, CiscoNSP List wrote: > To answer your question - Yes - The ME02, that connects to the ASR1006 > has a vlan interface....so we may be getting hit with this bug, > although, we are using the link that runs through the 2 > ME3600's(MPLS/OSPF/BGP) currently, without issue? > > re MPLS ping - Very strange - It is saying it is up on both routers(sh > mpls ldp nei, and logs report LDP nei is up on both routers, once mpls > ip is enabled on each Int), but I cannot mpls ping the loop (From ASR2 > POPA -> ASR1006 POPD)?
as adam suggested, this sounds like it could be CSCui74304: > Symptom: Remote MPLS ping fails in LFA when SVI is one of the core > interfaces. > > Conditions: This issue occurs when the SVI is one of the core > interfaces with IPFRR enabled. > > Workaround: FRR over SVI is currently not supported. So, below > workarounds can be applied to mitigate this issue. > > For OSPF: > > ip ospf fast-reroute per-prefix protection disable > > For ISIS: > > isis fast-reroute protection level-1 disable > > isis fast-reroute protection level-2 disable > > Isis fast-reroute protection disable > > Use clear ip ospf/isis process command after disabling the FRR feature > to access respective IGP functionalities. The bug seems to be marked private on the cisco bug tool, but this info comes from release notes for 15.4(1). Nick _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
