is anyone have experience with routing between vlan for hp procurve
switch's cuz i have a project to do with this switches so if can anyone
recommend to me what the best to configure i already making the routing
between vlan in the firewall and i need to move it to distribution switches
if you have any recommendation it will be great.
I could point out the reason that we're on the *cisco*-nsp list is that
we don't want to touch HP switches. Not with a 10-foot pole.
OTOH https://puck.nether.net/mailman/listinfo/ reveals a hp-nsp list...
What "we" are willing to touch or not is not really relevant IMHO;
speaking for myself, the bugs I've found in ProCurve gear were no worse
than what I've found in Cisco product lines. And with both: support is
best if you know (or can reach) the right people.
That said, the question is still pretty much out of scope for this
mailing list. I suggest the OP looks at HP support forums and reads the
switch documentation. Hint: enabling IP routing and running a routing
protocol isn't that difficult on these switches... for the YouTube
generation there's even video tutorials on the subject.
Regards,
Jeroen van Ingen
ICT Service Centre
University of Twente, P.O.Box 217, 7500 AE Enschede, The Netherlands
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
