Hi All, The issu loadversion command allows you to specify the switch and slot number of the VSS active and VSS standby chassis, however I was recently told you don't need to do this. Normally I would enter the following to kick off the upgrade:
issu loadversion 1/5 sup-bootdisk:s72033-ipservicesk9_wan-mz.122-33.SXI6.bin 2/5 slavesup-bootdisk:s72033-ipservicesk9_wan-mz.122-33.SXI6.bin Now I been told all you need to do is Issu loadversion sup-bootdisk: s72033-ipservicesk9_wan-mz.122-33.SXI6.bin Issu Runversion Issu Acceptversion Issu Committversion Has anybody done an upgrade like this?. Rgds Harry Harry Hambi BEng(Hons) MIET Rsgb _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
