FYI: Pushing 300Mbps/150Mbps up to channels and same traffic down to
clients will cause 40..50% CPU usage on 7201 with this kind of
configuration.
Source: personal experience
10/5/2015 11:43 AM, Mark Tinka пишет:
On 4/Oct/15 22:47, Samir Abid Al-mahdi wrote:
Hi,
Thanks alot for the insight.
I think we will be tight on budget. Maybe that is why a l2/l3 device is
suggested.
Do you think there is a cisco equlivant that support two functionalities
specially the bgp and enough space for the routing table ? As you have
pointed the necessity of this.
Appreciate your support.
If you're going to push less than 1Gbps of traffic, get a used 7201 or
7206-VXR/NPE-G2. That will be loads cheap.
Mark.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--
Regards, Oleksii Zolotarov
system administrator
ISP "Seech-Infocom"
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
