On 13 December 2015 at 18:19, Lukas Tribus <luky...@hotmail.com> wrote: > >> Hi All, >> >> Got some 7600s with RSP720-3CXL-10G and LAN cards (CFC, no DFCs) and >> I'm "trying" to run QoS on them. >> >> Does anyone know of a command to show the number of packets that >> entered each queue/show some queue counters? > > Afaik this should be it: > show queueing interface <intfname>
Sadly that command isn't supported: abr1#show q? qbm "show mls qos queuing int te3/1" shows me the MLS QoS configuration such queue depths, bandwidth allocation, thresholds etc and the total number of drop packets per CoS marking/queue. It doesn't show counters per queue. "show counters interface te3/1" is the same, it only shows lost packets tx/rx, so if I use multiple instances of a basic traffic generator like iPerf with different DSCP markings on each flow I don't actually know which queues the packets are going into (so if there is unexpected drops or traffic isn't being dropped etc, it's just guess work). This seems like a major floor to me. In the TAC case I have open the engineer is saying he doesn't believe there is such a command. Disappointing. Cheers, James. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/