> I have Cisco ME3400 switch which is limited to 4 ports NNI
> I discovered that I cannot apply any spanning-tree commands on any interface
> unless it's nni port
Have you tried with "port-type eni" ? It makes many, but not all, NNI things
work.
Cheers,
Bergonz
--
Ing. Michele Bergonzoni - Laboratori Guglielmo Marconi S.p.a.
Phone:+39-051-6781926 e-mail: [email protected]
alt.advanced.networks.design.configure.operate
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
