Michele, Thanks for your reply!
From which manufacturers do you interconnect equipments with EX/ZX (or ER/ZR)? I'm worried because of the different Wavelenght Range of the transceivers... 2016-01-18 7:23 GMT-02:00 Michele Bergonzoni <berg...@labs.it>: > > equipments of different vendors using 1000BASE-ZX/LH. Since 1000BASE-ZX > > isn`t standardized by IEEE, ... Can I connect 2 equipments of different > manufactures > > using their own manufactured transceiver? > > We do it all the time and never had any problem. Of course you have to > comply with minumum attenuation requirements (don't test them with a short > patch, you could damage your receivers). > > I too am curious to hear about stories of such incompatibilities, if any. > > The lack of a standard means that if it actually doesn't work, you will > have a hard time to blame it on vendors. I'm afraid you have to accept this > risk. > > Regards, > Bergonz > > -- > Ing. Michele Bergonzoni - Laboratori Guglielmo Marconi S.p.a. > Phone:+39-051-6781926 e-mail: berg...@labs.it > alt.advanced.networks.design.configure.operate > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- []'s LĂvio Zanol Puppim _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/