Happy to clarify James, to expand: " Anyone have any thoughts the most cost effective chassis available currently that supports 100G ports? Need to route upwards of 200 Gbps and handle full tables, but cost is definitely a factor."
I would be using 2x100G ports to upstream providers pulling full tables.. and probably 10G LAG groups or 40G ports to feed the downstream user who does not have 100G port capabilities. If I spread across two chassis for redundancy and failover.. then each chassis would have: 1 100G port facing an upstream 1 100G port facing the other chassis 10 10G or 4 40G ports facing the downstream customer Full routes The application doesn't really support spending $200k on the solution, so I'm looking around for something game changing. I think 100G might be too young at this point to find it honestly. Peter Kranz www.UnwiredLtd.com pkr...@unwiredltd.com _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/