Now this may only be on certain platforms – or not exist at all. I was sure in the past I saw a show command for the cef table that let you see if policy routing was being used on a source destination pair.
No one except students actually likes policy routing in the real world...but at certain places I am stuck with it. As policy routing does not show up in the routing table, and looking at route maps is cumbersome with large config – I think I once used a command that is similar to the command used to check the CEF load balancing output interfaces when using ECMP Does anyone know/remember this – or does it not exist? (in IOS) sh ip cef exact-route SRC DEST (on a sup2t) gives me the output of the adjacency (interface, nexthop) it is the normal outgoing interface in the routing table. Any ideas? Or did I dream this? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
