You need to redirect the serial port (the console of the router is on
the serial port).
http://lesser-evil.com/2014/08/ios-xrv-serial-port/
On 21/04/2016 01:44, Aaron wrote:
I seem to almost have csr1000v working in GNS3. but I only have aux port on
console. any idea how to get the serial port console working ?
I'm using..
Windows 7
virtual box
gns3
csr1000v-universalk9.03.17.01.S.156-1.S1-std.iso
----------------------------------------------------------------------------
---
csr-01 console is now available... Press RETURN to get started.
Router aux port is now available
Press RETURN to get started.
RP_0(diag)>
disable Turn off privileged commands
enable Turn on privileged commands
exit Exit
help Description of the interactive help system
terminal Set terminal line parameters
- Aaron
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
