I cannot for the life of me figure out why this box seems to think it has TCAM issues.. It's a SUP-2T XL platform.. Usage levels look well under TCAM limits.
---- May 23 12:06:22: %CFIB-7-CFIB_EXCEPTION: FIB TCAM exception, Some entries will be software switched May 31 08:58:51: %CV6_LC-5-FIB_EXCEP_ON: Failed to insert IPv6 prefix in FIB TCAM because it is full rtr #show platform hardware capacity forwarding L2 Forwarding Resources MAC Table usage: Module Collisions Total Used %Used 1 0 131072 1525 1% 2 0 131072 1526 1% 6 0 131072 1522 1% L3 Forwarding Resources FIB TCAM usage: Total Used %Used 72 bits (IPv4, MPLS, EoM) 1048576 555182 53% 144 bits (IP mcast, IPv6) 524288 25930 5% 288 bits (IPv6 mcast) 262144 1 1% detail: Protocol Used %Used IPv4 555180 53% MPLS 1 1% EoM 1 1% IPv6 25924 5% IPv4 mcast 6 1% IPv6 mcast 1 1% Adjacency usage: Total Used %Used 1048576 33569 3% rtr #sh mls cef exception status Current IPv4 FIB exception state = TRUE Current IPv6 FIB exception state = TRUE Current MPLS FIB exception state = FALSE Current EoM/VPLS FIB TCAM exception state = FALSE _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/