> Thanks Juergen > - Did you notice any significant increase in ram utilisation once you enabled the 2 full tables? > (i.e. ours is currently sitting at ~83%, base conf)....or did memory usage not change that much > (i.e. it was "reallocated" from other processes)
One Pair of them: 46.9% (1.62 GB) of 3.46 GB used 47.0% (1.63 GB) of 3.46 GB used started after reload at 37% and increases 1% per month Cisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(1)S1, RELEASE SOFTWARE (fc1) Other Pair: 37.6% (1.30 GB) of 3.47 GB used 36.2% (1.25 GB) of 3.47 GB used few variations +-1% since last reload 9 months ago Cisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(3)S3, RELEASE SOFTWARE (fc1) Third set: 40.7% (1.41 GB) of 3.47 GB used 40.7% (1.41 GB) of 3.47 GB used started with 39,7 5 month ago, so 0,2% grow per month Cisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(3)S4, RELEASE SOFTWARE (fc3) Looks like I must check the first pair. Why the heck is it running a ...1... release while all were installed with 15.4(3)S_latest_ ... found ... Customer did that upgrade by himself. Juergen _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/