On 06/22/2016 11:50 AM, Aaron wrote:
If IOS XE on the 920 is similar to IOS on ME3600 at least to the extent of
efp (si) implementation.... then perhaps this will work (taken from my
operational me3600)
interface GigabitEthernet0/1
switchport trunk allowed vlan none
switchport mode trunk
mtu 9202
load-interval 30
speed nonegotiate
service instance 1000 ethernet
encapsulation dot1q 1000 second-dot1q 100
rewrite ingress tag pop 2 symmetric
l2protocol tunnel
xconnect 10.101.0.15 10000 encapsulation mpls
mtu 1500
Actually no the 920 is more like the asr1000 and not like the me3600's
at all. I did try the above and it doesn't seem to work. It would seem
that only tagged packets entering the port would work anyways. I am
trying to put tags on untagged frames.
Mike-
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
