Hi, Is it somehow possible to include interface info in BGP-syslog Msg ? As it is done e.g. with PIM. Interface-Info is required by our NMS for correct filtering
*%PIM-5-NBRCHG: VRF test1: neighbor 1.1.1.1 DOWN on interface GigabitEthernet4/2.15 DR * *BGP: 1.1.1.1 resetting - interface GigabitEthernet4/2.15 down --> debug Msg. * *%BGP-5-NBR_RESET: Neighbor 1.1.1.1 reset (Interface flap) --> Syslog with no specific Interface info* cheers, keti _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
