Have you evaluated ASR9001-S running as BRAS?
You have IOS-XR instead and perhaps the price is slightly lower than the 
ASR1001-X.

Best Regards
Ted Johansson


-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Chris 
Balmain
Sent: den 11 oktober 2016 00:19
To: cisco-nsp@puck.nether.net
Subject: [c-nsp] ASR1001-X etherchannel subinterfaces

Hi there,

We're currently evaluating ASR1001-X with XE 3.16.00S / 15.5(3)S running BRAS 
role "on a stick" using 2x10G in an LACP etherchannel.

We've noticed that on dot1q subinterfaces on the bundle, while input counters 
appear to function normally, output counters massively under-read (not quite 
zero, but very close to - like maybe it's only counting process-switched 
traffic)

I did find one bug (CSCuv15454) which suggests a workaround ("show vlans"), but 
that appears to suffer from the same issue of under-reading counters.

We've also tried running the port-channel in active/standby mode (lacp 
fast-switchover + lacp max-bundle 1) which resolved some issues we had with 
egress QoS on subinterfaces and LNS/PTA users, but still get no counters.

Anyone else encountered this problem, any workaround known? Any other "gotchas" 
with ASR1000 etherchannel and/or subinterfaces on them?

Regards,
Chris
_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

******** IMPORTANT NOTICE ********
The content of this e-mail is intended for the addressee(s) only and may 
contain information that is confidential and/or otherwise protected from 
disclosure. If you are not the intended recipient, please note that any 
copying, distribution or any other use or dissemination of the information 
contained in this e-mail (and its attachments) is strictly prohibited. If you 
have received this e-mail in error, kindly notify the sender immediately by 
replying to this e-mail and delete the e-mail and any copies thereof.

Tele2 AB (publ) and its subsidiaries (“Tele2 Group”) accepts no responsibility 
for the consequences of any viruses, corruption or other interference 
transmitted by e-mail.
_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to