Hi

We have a couple of port-channels between Cisco 4948 and Cisco ASR 9006 devices, periodicity we are seeing these error disable with the following.

4948 log:
%SPANTREE-5-ROOTCHANGE: Root Changed for vlan 1234: New Root Port is Port-channel2. New Root Mac Address is xxxx.xxxx.0cc0 %SPANTREE-5-ROOTCHANGE: Root Changed for vlan 1234: New Root Port is Port-channel2. New Root Mac Address is xxxx.xxxx.0cc0
%SPANTREE-5-TOPOTRAP: Topology Change Trap for vlan 1234
%PM-4-ERR_DISABLE: channel-misconfig (STP) error detected on Po2, putting Te1/50 in err-disable state
%EC-5-UNBUNDLE: Interface Te1/50 left the port-channel Po2
%PM-4-ERR_DISABLE: channel-misconfig (STP) error detected on Po2, putting Te1/52 in err-disable state
%EC-5-UNBUNDLE: Interface Te1/52 left the port-channel Po2
%PM-4-ERR_DISABLE: channel-misconfig (STP) error detected on Po2, putting Po2 in err-disable state

ASR log:
ifmgr[209]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/18, changed state to Down ifmgr[209]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/18, changed state to Down ifmgr[209]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/19, changed state to Down ifmgr[209]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/19, changed state to Down BM-DISTRIB[1155]: %L2-BM-6-ACTIVE : GigabitEthernet0/0/0/18 is no longer Active as part of Bundle-Ether2 (Link is down) BM-DISTRIB[1155]: %L2-BM-6-ACTIVE : GigabitEthernet0/0/0/19 is no longer Active as part of Bundle-Ether2 (Link is down) ifmgr[248]: %PKT_INFRA-LINK-3-UPDOWN : Interface Bundle-Ether2, changed state to Down ifmgr[248]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface Bundle-Ether2, changed state to Down ifmgr[248]: %PKT_INFRA-LINK-3-UPDOWN : Interface Bundle-Ether2.1234, changed state to Down ifmgr[248]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface Bundle-Ether2.1234, changed state to Down

Is there anything that I maybe missing on the ASR configuration which might be causing this to happen?

----------------------------------------------------------------------------------------------------------
interface GigabitEthernet0/0/0/18
 bundle id 2 mode active
 cdp
 negotiation auto
!
interface GigabitEthernet0/0/0/19
 bundle id 2 mode active
 cdp
 negotiation auto
!
interface Bundle-Ether2
  mtu 9198
!
interface Bundle-Ether2.1234 l2transport
 encapsulation dot1q 1234
 rewrite ingress tag pop 1 symmetric
!

----------------------------------------------------------------------------------------------------------

#show bundle bundle-ether 2
Tue Oct 11 10:51:59.942 UTC

Bundle-Ether2
  Status:                                    Up
  Local links <active/standby/configured>:   2 / 0 / 2
  Local bandwidth <effective/available>:     2000000 (2000000) kbps
  MAC address (source):                      00c1.6408.f1c3 (Chassis pool)
  Inter-chassis link:                        No
  Minimum active links / bandwidth:          1 / 1 kbps
  Maximum active links:                      64
  Wait while timer:                          2000 ms
  Load balancing:                            Default
  LACP:                                      Operational
    Flap suppression timer:                  Off
    Cisco extensions:                        Disabled
    Non-revertive:                           Disabled
  mLACP:                                     Not configured
  IPv4 BFD:                                  Not configured

Port Device State Port ID B/W, kbps -------------------- --------------- ----------- -------------- ---------- Gi0/0/0/18 Local Active 0x8000, 0x0004 1000000
      Link is Active
Gi0/0/0/19 Local Active 0x8000, 0x0003 1000000
      Link is Active
----------------------------------------------------------------------------------------------------------


Bundle-Ether2.1234 is attached to a VPLS going off to other parts of the network.

Cisco 4948 config:
!
interface TenGigabitEthernet1/50
 switchport trunk allowed vlan 1234,1235, etc
 switchport mode trunk
 mtu 9198
 logging event link-status
 channel-protocol lacp
 channel-group 2 mode active
!
interface TenGigabitEthernet1/52
 switchport trunk allowed vlan 1234,1235, etc
 switchport mode trunk
 mtu 9198
 logging event link-status
 channel-protocol lacp
 channel-group 2 mode active
!
interface Port-channel2
 switchport
 switchport trunk allowed vlan 1234,1235, etc
 switchport mode trunk
 mtu 9198
!

----------------------------------------------------------------------------------------------------------

#show etherchannel 2 detail
Group state = L2
Ports: 2   Maxports = 8
Port-channels: 1 Max Port-channels = 1
Protocol:   LACP
Minimum Links: 0


        Ports in the group:
        -------------------
Port: Te1/50
------------

Port state    = Up Mstr Assoc In-Bndl
Channel group = 2           Mode = Active          Gcchange = -
Port-channel  = Po2         GC   =   -             Pseudo port-channel = Po2
Port index    = 1           Load = 0x00            Protocol = LACP

Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs.
        A - Device is in active mode.        P - Device is in passive mode.

Local information:
                            LACP port     Admin     Oper Port        Port
Port      Flags   State     Priority      Key       Key Number      State
Te1/50    SA      bndl      32768         0x2       0x2 0x33        0x3D

Partner's information:

                  LACP port                        Admin  Oper Port    Port
Port      Flags   Priority  Dev ID          Age    key    Key Number  State
Te1/50    SA      32768     00c1.6408.f1c4  21s    0x0    0x2 0x4     0x3D

Age of the port in the current state: 0d:15h:36m:32s

Port: Te1/52
------------

Port state    = Up Mstr Assoc In-Bndl
Channel group = 2           Mode = Active          Gcchange = -
Port-channel  = Po2         GC   =   -             Pseudo port-channel = Po2
Port index    = 0           Load = 0x00            Protocol = LACP

Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs.
        A - Device is in active mode.        P - Device is in passive mode.

Local information:
                            LACP port     Admin     Oper Port        Port
Port      Flags   State     Priority      Key       Key Number      State
Te1/52    SA      bndl      32768         0x2       0x2 0x35        0x3D

Partner's information:

                  LACP port                        Admin  Oper Port    Port
Port      Flags   Priority  Dev ID          Age    key    Key Number  State
Te1/52    SA      32768     00c1.6408.f1c4  21s    0x0    0x2 0x3     0x3D

Age of the port in the current state: 0d:15h:36m:33s

        Port-channels in the group:
        ---------------------------

Port-channel: Po2    (Primary Aggregator)

------------

Age of the Port-channel   = 154d:19h:59m:09s
Logical slot/port   = 21/2          Number of ports = 2
Port state          = Port-channel Ag-Inuse
Protocol            =   LACP
Port security       = Disabled

Ports in the Port-channel:

Index   Load   Port     EC state        No of bits
------+------+------+------------------+-----------
  1     00     Te1/50   Active             0
  0     00     Te1/52   Active             0

Time since last port bundled:    0d:15h:36m:32s    Te1/50
Time since last port Un-bundled: 0d:15h:39m:40s    Te1/52
----------------------------------------------------------------------------------------------------------

ASR is running XR 5.3.3
4948 is running IOS 15.1(2)SG7

Any ideas on what the issue might be?

Thanks

David


_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to