> On Oct 26, 2016, at 1:51 PM, Chuck Church <chuckchu...@gmail.com> wrote: > > Is the router out of RAM? A really low memory condition might cause this. > 'show mem' or 'show log' (if configured) might show some malloc errors if > that is the issue.
+1 I had a similar issue a while back with a 7206VXR that was getting full routes. Worked fine, forwarding packets, but could not sh run. Cutting back to customer routes + default “fixed” it about 10 minutes after the upstream made the change. —Chris _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
