Be aware that the ROMMON has issues with cards >1G in many cases, 4G cards and
larger might work once IOS has booted but not to boot from ROMMON, even if you
format them and copy the image to them on the same supervisor.
Kind regards,
Sibbi
Þann 29/11/16 19:55, ritaði "cisco-nsp on behalf of Saku Ytti"
<cisco-nsp-boun...@puck.nether.net on behalf of s...@ytti.fi>:
On 29 November 2016 at 12:51, <lis...@cutre.net> wrote:
Hey,
> So I formated a CF in another 6500, copied the IOS and tried to boot from
disk0 without luck. I tried erasing nvram and I even copied a boot image and
the IOS ROMMON image to the CF but I always got the same message:
There are multiple incompatible formats. I've once formatted CF on
7200 and copied images to it, inserted it on 7600, where 7600 IOS read
it fine, but it wouldn't boot, because ROMMON couldn't read it.
Reformatted on another 7600 with similar SUP and it was good to go.
https://supportforums.cisco.com/document/21981/how-format-and-erase-flash-cisco-router
http://www.cisco.com/c/en/us/support/docs/routers/7200-series-routers/6145-pcmciamatrix.html
Perhaps your 6500 has older sup which does different format than your
sup720?
--
++ytti
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
