Hey all, Apologies if this is a muppet question, but still getting my bearings with MPLS. Most L3VPN designs I've checked out don't really address this specific design...
I've got a multi-tenant network that would either be done w/VRF-lite or L3VPN, but I don't have a CE router, per se. Is it somewhat accepted design to run L3VPN in a scenario where the PEs in DC1 are vrrp active/standby for DC1 VLANs in all VRFs, and the PEs in DC2 are active/standby for DC2 VLANs in all VRFs, and so on? From each PE, there'd be a layer 2 path to the edge hosts within those sites, and we're talking pure routing here, no state tracking devices, etc. PEs would be meshed iBGP either full or w/RRs. Not sure if there are some limitations/major issues I'm overlooking here, but seems much cleaner than trying to stitch vrf-lite everywhere. Thank you. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/