Hi i have a problems with a cisco 7301 IOS:
Cisco IOS Software, 7301 Software (C7301-ADVENTERPRISEK9-M), Version 12.2(33)SRD5, RELEASE SOFTWARE (fc2) No special config on C7301, no qos, no access list, no filter ... only IP Route On this router, i have two ports used: GigabitEthernet0/0 GigabitEthernet0/1 Port 0/0 it's a 1 Gbits link Port 0/1 it's a 1 Gbits link but i two vlan each vlan is a fiber remote link, one of 20Mbits and the second 500 Mbits When i start a upload from a pc behind the 500 Mbits vlan link, no problems, i have 500 Mbits and cpu is good: CPU utilization for five seconds: 33%/22% but when i download, i am limited to 266 Mbits and the CPU of the C7301 are high: CPU utilization for five seconds: 98%/43% anyone know this problems ? It's possible because the cisco don't know that the vlan is limited at 500 mbits and he want sent at 1 gbits ? regards Olivier _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/