Hello,
had a "chance" today to check this.
Interesting ist that the ressources are even lower than normal (approx.
100k IPv4 routes less)
L3 Forwarding Resources
FIB TCAM usage: Total Used
%Used
72 bits (IPv4, MPLS, EoM) 1048576 557541
53%
144 bits (IP mcast, IPv6) 524288 45727
9%
288 bits (IPv6 mcast) 262144 1
1%
detail: Protocol Used
%Used
IPv4 557539
53%
MPLS 1
1%
EoM 1
1%
IPv6 45724
9%
IPv4 mcast 3
1%
IPv6 mcast 1
1%
Adjacency usage: Total Used
%Used
1048576 32191
3%
kind regards
Rolf
> Hello,
>
> I think a full 'show platform hardware capacity' output from the affected
> device before reboot could be the best starting point for
> troubleshooting...
>
> You may use a EEM TCL script for autosaving useful outputs in case of such
> events.
> --
> Best regards,
> Vladimir Troitskiy
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
