On 4 June 2018 at 23:49, <adamv0...@netconsultings.com> wrote: > Hi gents, > Thanks for the replies, mine looks similar: > > <interface type='bridge'> > <mac address='52:54:01:00:22:98'/> > <source bridge='backbone-1'/> > <virtualport type='openvswitch'> > <parameters interfaceid='7c7cf663-24e5-48d0-bae7-0ffb594ac0c8'/> > </virtualport> > <target dev='ge-25-pe3.pop'/> > <model type='virtio'/> > <alias name='net26'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x1e' > function='0x0'/> > </interface> > > First I thought it's the problem with 48 interfaces in xml -while CSR > supports max 26 > So I tried with 26 to no avail even 16 is messed up but 8 is ok. > I even tried to hardcode the pci bus and slot -but that didn't help either. > And it's not ordering based on MAC value either. > Haven't run into this problem with vMX or XRv,
I haven't tried with this many interfaces, normally using 4 or 6 interfaces. Our config looks like Matus provided and works fine for us. > Also on a side not the standard console aint' working on these either: > <serial type='tcp'> > <source mode='bind' host='127.0.0.1' service='60165'/> > <protocol type='telnet'/> > <target port='0'/> > <alias name='serial0'/> > </serial> > > Not sure what's going on here Try this: <serial type='tcp'> <source mode='bind' host='127.0.0.1' service='4555'/> <protocol type='telnet'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='tcp'> <source mode='bind' host='127.0.0.1' service='4555'/> <protocol type='telnet'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> Cheers, James. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/