> So i did continue and no it is 99-100% full, "install add source ..." > works but "install activate ..." aborts. > > I do not have "userfiles" on it, i did but the ios,tar,smu's onto "harddisk:" > . > I did not find any hint how to make space there, i tried > > "clear configuration commits oldest 100" > "install remove inactive all synchronous" > > But this did not help
What helped was # install deactivate superseded sync # install commit sync I found that in an older IOS-XR documentation, not in the current. When istalling SMU's in release-date order, asr9k-x64-6.5.3.CSCvn74595.tar results in ssh not working, going back removes my three ssh config lines (good to have the serial CON to entert hem again). After installing all the other SMUs i tried again, and this time i had no problems. In the corresponding Readme are some dependencies mentioned But i was unable to locate them by their name/number. And after all was over, i did again # install deactivate superseded sync # install commit sync Plus # install remove inactive all sync # install commit sync "run df -k" show root at 77% . So i am now thru with this, i am some dekandes older, my hair went gray . Probably tomorrow a big bug will be found so an other IOS-XR version ist he new "recommanded" ☹ BTW, TAC was no help on this. Thank you for your kind help, Jürgen Marenda. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/