Hi
I am currently using two IGX 8430 connected via a dedicated 2MBPS circuit. One is in India and the other in USA. The IGX 8430 mutiplexes about 8T1 lines and 1 serial port. We have been using this setup since last 15 years and would now like to upgrade the technology. Is the cisco ASR 902 a right choice to do this. I know we need a 8 or 16 port DS1/E1 CEM card in each ASR. Instead of the serial, we can have Ethernet for data. What will be the trunk port (obviously Ethernet). Can it run over MPLS or normal internet. In case there is some other cisco equipment which is not IGX/MGX, please advise. Thanks in advance. Regards Ravi _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/