--- Begin Message ---
Hello,
I have a problem of a DWDM-SFP-10G-C untunable not working in catalyst 3650 rel
denaly 16.3.6The transceiver is not recongnized.
cannot read eeprom, when using "service unsupported-transceiver" same result
the unit goes in error disable mode, after "no errdisable detect cause
gbic-invalid" i see 0,39dbm @1310nm on SMF but the unit is stuill not
recognized. See logs. Tested with Denali 16.3.6
Transceiver is not original, but oem same codification of original.
in a asr9006 it works perfectly.
Does anyone hass a suggestion? where am i wrong?
Thanks a lot even if not.
here copy of log with and without unsupported transceiver command.
Lo
*Aug 4 12:01:33.370: %PLATFORM_PM-6-MODULE_ERRDISABLE: The inserted SFP module
with interface name Gi1/1/1 is not supported
*Aug 4 12:01:33.371: %PM-4-ERR_DISABLE: gbic-invalid error detected on
Gi1/1/1, putting Gi1/1/1 in err-disable state
*Aug 4 12:01:34.570: %SYS-5-RESTART: System restarted --
*Aug 4 12:01:33.370: %PLATFORM_PM-6-MODULE_ERRDISABLE: The inserted SFP module
with interface name Gi1/1/1 is not supported
*Aug 4 12:01:33.371: %PM-4-ERR_DISABLE: gbic-invalid error detected on
Gi1/1/1, putting Gi1/1/1 in err-disable state
*Aug 4 12:01:34.570: %SYS-5-RESTART: System restarted --
Cisco IOS Software [Denali], Catalyst L3 Switch Software
(CAT3K_CAA-UNIVERSALK9-M), Version 16.3.6, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
--- End Message ---
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
