James, The same behavior, but there is no 'on' option for the ASR (in this XE version, anyway). Only options are 'active' and 'passive'. I think 'channel-group 1<enter>' is a valid config, but I have not tried it. Given some of the responses I've received already, I'm going to assume this is just not officially supported.
-evt On 8/21/20, 10:38 AM, "James Bensley" <jwbensley+cisco-...@gmail.com> wrote: What happens if you change each interface to be "channel-group 1 mode on" and remove "l2protocol peer lacp" to disable LACP and remove it from the equation? Cheers, James. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/