Have you updated your 'control-plane' config to allow SNMP from your
sources?
On 11/9/20 9:18 AM, Olivier CALVANO wrote:
Hi
I can't get the snmp to work on my cisco ASR9000 to monitor it with
Centreon.
i use this configuration:
snmp-server ifindex persist
snmp-server trap-source Loopback0
snmp-server view public system included
snmp-server community public view public ro admin-nets
snmp-server group SnmpAdmins v3 auth ipv4 admin-nets
snmp-server user admin SnmpAdmins v3 auth md5 **PASSWORD
ipv4 access-list admin-nets
permit ipv4 172.20.18.0/28 any
...
when I run the check requests on my centreon, in snmp v3 with login / pass
I always have a "no answer"
I did not find an example configuration in version 2c
a idea ?
thanks for your help
olivier
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/